Products Map

Adapts 1978-83 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

Adapts 1978-1983 Timken bearing Front wheels to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has correct length axle spacers and special width adapter disk spacers to work with the 2000-up legs.
Includes special ID bore brake disk made so no modification to wheel is necessary. Replacement brakes disks available here
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

Stock Replacement For 1980-84 FXR & FLT Models
Made for 530 Chains.
Choose from 22T or 23T
 

One Piece Rocker Base Gasket.
Fits all EVO Big Twins & All Evo Sportsters
Set includes 2 Gaskets
Modern Embossed Single Layer Steel with Viton Coating, these dont leak like paper ones.

Corrects 1984-1999 Timken bearing Front wheel width and bearing spacing to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has special length axle spacers and special width adapter disk spacer.
Made to use 2000-Up Brake Disks.
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

If you have a bike with a 1" or 25mm axle please see other adapter kit.

 

Adapts 1984-1999 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

One Piece Rocker Base Gasket.
Fits all Models of Twin Cam Engines from 1999-2017
Set includes 2 Gaskets
Modern Embossed Single Layer Steel with Viton Coating, these dont leak like paper ones.

2 " Extended, Satin Finish

2 " Extended, Chrome Finish

This Kit converts your 2000-2007 Rear Wheel with 3/4 or 1" Bearings to 25mm & the right width for the 2018 Softails
Work with 2000-2007 Dyna, Softail(except nighttrain), Sportster and Touring Wheels
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.
This is for 2018-Up Low Rider, Low Rider S, Streetbob, Fatbob, FXLR, Softail Standard

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
1- Axle Spacer
1- Pulley/Sprocket Spacer
1- New Grade 8 Longer Bolts
Instructions

Note: Wheel that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.

This Kit converts your:
-2000-2007 XL Front Wheel
or
-2000-2005 Dyna Front Wheel
to 1" bearings & the correct width for
-2006-07 49mm Narrow/Mid Dyna Front Ends (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG) or 16" XL Wheels

Includes:
2- 1" Bearings
1- Inner Axle Sleeve
2- Axle Spacers
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)

Spacers have 2 bolt patterns.

One bolt pattern is drilled and counter-bored for 7/16" socket head cap screws, and the other for your stock pulley / sprocket bolts.

Includes 7/16" Bolts.

These have a 2.208 locating diameter and will fit 2000 & up wheels. (Ball Bearing Wheels)

These spacers have clearance for 1

This sprocket is made to fit 2006-up Twin Cam engines with 1970-2005 inner primarys and has right offset for use with 1998-06 clutch hub assemblies.
24 Spline , 25 Tooth

NEW!
Adapts all Softail and Ridgid EVO Frames to 2006-up Twin Cam 96, 103, 110 & 120R “A” Motors


Motor Adapter Plate includes:
Hardware
Oil line Fittings
O-Ring