Products Map

NEW!
Adapts FXR & Dresser Transmissions/ Frames to 2006-up Twin Cam 96, 103, 106, 120, etc  “A” Motors


Motor Adapter Plate includes:
Hardware
Oil line Fittings
O-Ring

This sprocket is made to fit 2006/7-up Twin Cam engines with 1970-2005 inner primarys and has right offset and tooth combination for use with 1984-1993 clutch hub assemblies.
24 Spline , 24 Tooth

These kits Convert 25mm 07-17 Softails Front Wheels to 96-99 Softail Front ends

Keep the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out
Note: This eliminates the speedo drive on bikes that had one.

Kits Includes:
-2 Stainless Steel Bearing Adapters
-Two New Axle Spacers
 

Adapts:
2007-17 Softail Front wheels (25mm Bearings)
To
2000-2006 Softails &
2000-2005 FXDWG Dyna Wide Glide

This Kit converts your 2008-2017 Rear Wheel with 25mm bearings to the right width for the 2018-up Softails
Work with 2008-2017 Dyna, Softail(except nighttrain) & Sportster Wheels
Wheel will drop in place of your current wheel with this setup.
Has correct axle spacer and spaces the pulley out the correct amount to line up with transmission pulley. (If using with a chain kit we can combine the spacers needed into one)

This is for 2018-Up Low Rider, Low Rider S, Streetbob, Fatbob, FXLR, Softail Standard

Includes:
1- Axle Spacer
1- Pulley/Sprocket Spacer
1- Longer Grade 8 Bolts & Washers
Instructions

This Kit converts your:
2008-17 XL, 2008-17 Dyna or 2008 Touring Rear Wheel
to 1" bearings & the correct width for
06-07 Dyna, 05-07 XL & 02-07 Touring (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Includes:
2- 1" Special Width Bearings
1- Axle Sleeve

This kit Converts 2008-Up Touring 25mm Wheels to 1984-99 Touring Front Ends

Keep the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out
Note: This eliminates the speedo drive on bikes that had one.

Kits Includes:
-2 Stainless Steel Bearing Adapters
-Two New Axle Spacers
 

This kit Converts 2008-Up XL Front Narrow Wheels to 2000-2007 Sportsters & 2000-2003 Dyna

Keep the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out

Kits Includes:
-2 Stainless Steel Bearing Adapters
-One New Axle Spacer
 

This Kit converts your:
-2008-Up XL Front Wheel (25mm bearing)
to 1" bearings & the correct width for
-2004-05 39mm Dyna Front Ends (1" Axle)

Reuse the inner 25mm sleeve in the wheel.
Wheel will drop in place of your stock wheel with this setup.

Please note this is not for Dyna Wide Glide Front Ends(FXDWG)

Includes:
2- 1" Special Width Bearings
2- Axle Spacers

This Kit converts your:
-2008-Up XL Front Wheel (25mm bearing)
to 1" bearings & the correct width for
-2006-07 49mm Narrow/Mid Dyna Front Ends (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG) or 16" XL Wheels

Includes:
2- 1" Special Width Bearings
2- Axle Spacers
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)

This Kit converts your 2008-Up XL Front Wheel to the correct width for 2008-up 49mm Narrow/Mid Dyna Front Ends
 Has correct axle & disc spacers to match OEM Dyna Wheel.
Keep the 25mm bearings already in the wheel and just add the spacers.
Wheel will drop in place of your stock wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG) or 16" XL Wheels

Includes:
2- Axle Spacers
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)

Fits 1952-1978 Sportster

21 Tooth
Excellent Quality
Made in Italy

Fits 1952-1978 Sportster

22 Tooth
Excellent Quality
Made in Italy

Fits 4 Speed Big Twin 1936-1979
22 Tooth
Excellent Quality
Made in Italy

Fits 1952-1978 Sportster

23 Tooth
Excellent Quality
Made in Italy