Adapts 1984-1999 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

Solid sprocket conversion to eliminate compensator assembly.
Eliminates slippage and noise from compensator.
It replaces your failing stock compensating sprocket and reduces driveline noise level.

Made from Tool Steel & Heat Treated.

MADE IN USA

Includes Flat washer & Grade 8 nut.

Our kit gears down your bike and upgrades the stock primary chain auto-adjuster to our bullet proof manual adjuster.
Solid sprocket conversion eliminates compensator assembly.

Fits:
1988-Up FXR
1991-2017 FXD
1988-Present Sportsters

Machined from Stainless Steel
Will never rust, seize up and leave you with a broken stud in the head.
Made correctly with course thread on the engine side and fine on the nut side.
Set of 4 for one engine, includes Serrated Stainless Flange Nuts.

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportster
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1984-1999 3/4" Timken bearing rear wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Made from Billet Aluminum.

This beefed up support will eliminate flexing when using high lift cams & stiff valve springs.

Adapts 1978-1999 3/4" Timken bearing front wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna Narrow/Mid Front Ends
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock dyna disks)
Single or Dual Disk available

Not for FXDWG(Wide Glide Dyna)

Simple Swingarm Adapters for upgrading your 1984-01 Touring & FXR to the newer 2002-2008 Swingarm
Made from stainless steel

Remove existing adapters in 02-08 Swingarm and install these. Reuse your stock pivot shaft & 02-08 spacer blocks.

For Harley Davidsons

Push in cap, start motor, once motor starts, compression release automatically pops off.

Our Same Corrosion Resistant All Stainless Steel Compression Release with a Solid Brass Cap!

Sold per pair(2)

Now Available for 7 Spoke 19" Morris Mags Wheels (Harley # 43522-77)
We have made hubs that adapt this wheel to replace 2000-Up Rear Wheel applications
Uses standard 2000-Up Brake disc and Sprocket/Pulley (2.2" Locating Diameter)
One side of the wheel will need to be drilled & tapped to 7/16-14.

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers. Wheel will drop into place of the stock wheel.

This can be used with 2000-Up Sportsters, Dynas & Most Softails

(Also can be used with 1984-1999 Sportster, FXR, Softail and Dyna. These will need 2000-up brake disk, 2000-up sprocket/pulley and axle spacer adjustment.)

Drill and tap set available when you buy this kit:

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap
   

Kit Includes:
Adapter Hubs
Inner Wheel Sleeve
Hub Mounting Hardware
Bearings

(This does not include the wheel)

Having a hard time finding sealed bearing wheels?
This kit allows you to use the 1999-older tapered bearing wheel in place of 2000-up 3/4" ,1" or 25mm sealed bearing wheels.
Timken bearings are not used, new bearings are used in the adapter hubs.
Adapts 1984-99 19" Front Mag or Wire Wheels to Rear of 2000-Up Sportsters.
Use your stock Brake rotor and sprocket/pulley bolts.

This can be used with any Harley Model(Dyna, FXR, Softail)

Choose your Bearing/Axle Size from the list.

Includes:
Brake side hub adapter
Pulley side hub adapter
2 Bearings
1 Inner Bearing Sleeve
7/16-14 Spacer to wheel bolts- Grade 8
5/16-18 Spacer to wheel bolts- Grade 8

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap

Adapts 2000-Up & 1984-99 19" Front Mag Wheels to Rear of XL Sportsters
Use your stock Brake rotor and sprocket/pulley bolts
Stock bearings stay in the wheel, where they are the strongest.
Choose your Bike year from the list.

Please note 2005-2007 front wheels need to be converted from 3/4" to 1" to use on same year rear.

Includes:
Dual Pattern brake disk spacer
Dual Pattern pulley spacer
7/16-14 Spacer to wheel bolts- Grade 8
7/16 Lock Washers
5/16-18 Spacer to wheel bolts- Grade 8
2 Axle spacers

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Beautiful sand casting
CNC Machined

Made from hardened steel with black-oxide coating to prevent corrosion
Expands from 1-3/16" to 2-5/8"
This covers harley neck bearing races and timken wheel bearings

Used with #4751 Kit
For Use With 1984-99 Front FXR/DYNA/XL Wheels in 2006- 17 Narrow/Dyna Front Ends
-Billet Aluminum

Axle and Spacer kit to Adapt:
1984-99 FXR/XL/DYNA Front Wheels
to
2000-2007 Touring/Bagger

Fits:
2018- Up Harley Streetbob & Low Rider (Except Low Rider S & ST)
Set includes:  Raked Fork cups, New Bearings, and a New Fork stem

Machined from 4140 Tool Steel & Bright Nickel Plated for Corrosion Resistance
Bottom bearing cup has a fork stop lug.

Replacement for Stock Gauge
Includes Wiring and bulb

Spacer kit to adapt 2000-2007 Rear Wheels with 3/4" Bearings to All 1984-99 Harleys

Adapts HSR-42 Mikuni Carb to OEM 2 Bolt Manifold

Precision machined bore, tapers from Mikuni outlet diameter to S&S manifold inlet size.
Substantial flow increase using S&S's larger plenum intake manifold.

Applications: 1986-2006 FLSTF Softail
These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated
These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications: 1984-2006 FXST Softail, 2004-2005 FXDWG
These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated
These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2008-2024 Touring
2008-Newer FXDWG

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

This kit Converts 2000-07 Touring Wheels that came with 1" bearings to 1984-99 Touring Front Ends
 

Adapts: 2000-Up Brake Calipers TO 1988-1999 Dyna, FXR, Bagger, Softail & Sportster

Replacement for Stock Gauge
Includes Molded Rubber Grommet.

Adapts:2000-22 Sportster Narrow Glide Wheels & 2000-2005 Dyna Front Wheels
TO: 1988-99 FXR, DYNA, & Sportsters Using 2000-Up Style Calipers

This Kit spaces your 2008-2017 Dyna Front Wheel correctly for 2018-up Softail Streetbob & FXLR/Low Rider
Use the stock bearings in your wheel, no axle spacers need to be changed.

This Kit converts your 2006-2007 Dyna Front Wheel with 1" Bearings to the correct 25mm bearing width for 2018-up Softail Streetbob & FXLR
Has correct spacer that go behind the bearing to match OEM 25mm Wheel.
The older Wheel will drop in place of your 25mm wheel with this setup.

Stainless Steel Flange Bolt Set for Lower Shock Bolts on All FXR & Touring up to 2001

Made from High-strength steel
Replaces OEM kickstand perfectly
Chrome Plated