Hardware

For 10mm & 3/8 Threads

Used on our Compression Releases

.045 Inches Thick

Crushable Steel

Sold in Packs of 4 Washers

Fits: 82-86 FXR, FXRS, FXRT & FLT

#28 in image

High Strength Grade 8
Works with all 2006-Up Twin Cam and M8 Motors with our Compensator Eliminators

Available in:
ARP Stainless
ARP Black Oxide Steel

-12 Point
-Grade 10
-Includes Stainless Steel Thick Washers

Machined from 316 Stainless Steel

These are are high strength and ultra corrosion resistant.
Will never rust, seize up and leave you with a broken stud in the head.
Made correctly with course thread on the engine side and fine on the nut side.
Set of 4 for one engine, includes Serrated Stainless Flange Nuts.

Set of 10 Torx/Star Bolts for both brake disks
Stainless Steel Will never Rust or Corrode like stock or chrome bolts.

Metric M8 x 1.25 Thread Size for 2014+ Bagger Front Wheels with large 5 bolt brake disk pattern ONLY

Set of 5 Torx/Star Bolts in the hard to find stock style thick button head.

Stainless Steel Will never Rust or Corrode like stock or chrome bolts.

5/16-18 Thread Size for Front Wheels

Stock Length

Also Available in 1/4" Longer

Replace your rusty steel plates with our Billet Aluminum ones.
3/8 Thick
Made in USA

Stainless Steel Flange Bolt Set for Lower Shock Bolts on All FXR & Touring up to 2001

Set of 3 Plugs needed for one motor

Set of 5 Torx/Star Bolts in the hard to find stock style thick button head.

Stainless Steel Will never Rust or Corrode like stock or chrome bolts.

3/8 Thread Size for Rear Wheels

Stock Length

Also Available in 1/4" or 1/2" Longer

New Old Stock OEM rubber mounts made by "Lord" 1/4"-20 Threads on Both Sides Oil Tank / Battery Box / Seat / Dash BIG TWIN 1965-Up, SPORTSTER 1967-Up

(2) .048" Thick Shims for fine tuning motor sprocket to clutch basket alignment.

Works with all Big Twin engines from 1958-2006 (except 2006 Dyna)

(2) .048" Thick Shims for fine tuning motor sprocket to clutch basket alignment.

Works with all 2006+ Twin Cam & M8 engines (except 2006 Touring & Softail)

Bend the tabs up to prevent your sprocket bolts from loosening.
Made from Stainless Steel