Hardware

New Old Stock OEM rubber mounts made by "Lord" 1/4"-20 Threads on Both Sides Oil Tank / Battery Box / Seat / Dash BIG TWIN 1965-Up, SPORTSTER 1967-Up

(2) .048" Thick Shims for fine tuning motor sprocket to clutch basket alignment.

Works with all Big Twin engines from 1958-2006 (except 2006 Dyna)

(2) .048" Thick Shims for fine tuning motor sprocket to clutch basket alignment.

Works with all 2006+ Twin Cam & M8 engines (except 2006 Touring & Softail)

Bend the tabs up to prevent your sprocket bolts from loosening.
Made from Stainless Steel

Set of 8 Bolts to Replace all Hub to Sprocket Bolts

All 304 Stainless Allen Bolt Kit for 2000-Up Calipers on Dyna, XL, Softail and Touring Bikes
Correct Metric Thread
Incudes 3 Bolts to cover all 2000-2020 Applications (2 Piston, 4 Piston, Brembo)
Replaces Harley # 44160-00 & 44163-00
This set is for one caliper

These inserts make it easy to use a Rear Wheel on the front of your bike.

Converts the 7/16-14 thread of a rear wheel to 5/16-18 for front rotors and bolts.

Easy install with a Large screw Driver, Locktite pre-applied to external threads.

Set of 5 Inserts

Includes bolts & Washers for one motor

Made from high strength stainless steel.
Will never rust or break
Accurate reproduction of the stock item.

Sold in pairs(2)
Includes Grade 8 bolts for inside your fender.

Fitment:
1987-Up FXR
1988-1990 FLT

Used with our Ignition & Auto Advance

Also Stock Replacment for Points Igntions

Set of 4 Nuts For all EVO and Twin Cam Engines.

Stainless Steel- Will never Rust & Serrated to prevent loosening

Extra Compact for getting at the upper stud closest to the head fins.

Uses a 1/2" Socket

Works with all EVO and Twin Cams

5/16-24 Thread

Grade "8" 7/16 Bolts for all Harley sprockets and pulleys

Hex Bolts 1.25", 1.75", 1.5", 2", 2.25", 2.5" Lengths
Hex Bolts Made in Canada by INFASCO

Grade 8 are at least 25% stronger than medium-strength steel screws. Grade 8 steel hex head screws are marked with six radial lines. Length is measured from under the head.
150,000 PSI Tensile Strength

Includes Grade 8 Lock Washers(These are about 1/8" thick, so take that in to account)
Lock Washers made in USA by Wright

Sold in sets of 5 bolts & 5 Lock Washers

7/16 "Allen" Head Bolts with correct length for all sizes of our dual hole pattern spacers and 19" Rear Wheel Hub Kits

With a tensile strength of 170,000 psi, these alloy steel screws are stronger than Grade 8 steel screws.

Sold in sets of 5 bolts

5/16 "Allen" Head Bolts for the brake side of 19" Rear Wheel Hub Sets and Morris Mag Hub Sets