Adapts 1984-1999 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

Solid sprocket conversion to eliminate compensator assembly.
Eliminates slippage and noise from compensator.
It replaces your failing stock compensating sprocket and reduces driveline noise level.

Made from Tool Steel & Heat Treated.

MADE IN USA

Includes Flat washer & Grade 8 nut.

Our kit gears down your bike and upgrades the stock primary chain auto-adjuster to our bullet proof manual adjuster.
Solid sprocket conversion eliminates compensator assembly.

Fits:
1988-Up FXR
1991-2017 FXD
1988-Present Sportsters

Machined from Stainless Steel
Will never rust, seize up and leave you with a broken stud in the head.
Made correctly with course thread on the engine side and fine on the nut side.
Set of 4 for one engine, includes Serrated Stainless Flange Nuts.

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportster
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1984-1999 3/4" Timken bearing rear wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Made from Billet Aluminum.

This beefed up support will eliminate flexing when using high lift cams & stiff valve springs.

Adapts 1978-1999 3/4" Timken bearing front wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna Narrow/Mid Front Ends
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock dyna disks)
Single or Dual Disk available

Not for FXDWG(Wide Glide Dyna)

Simple Swingarm Adapters for upgrading your 1984-01 Touring & FXR to the newer 2002-2008 Swingarm
Made from stainless steel

Remove existing adapters in 02-08 Swingarm and install these. Reuse your stock pivot shaft & 02-08 spacer blocks.

For Harley Davidsons

Push in cap, start motor, once motor starts, compression release automatically pops off.

Our Same Corrosion Resistant All Stainless Steel Compression Release with a Solid Brass Cap!

Sold per pair(2)

Now Available for 7 Spoke 19" Morris Mags Wheels (Harley # 43522-77)
We have made hubs that adapt this wheel to replace 2000-Up Rear Wheel applications
Uses standard 2000-Up Brake disc and Sprocket/Pulley (2.2" Locating Diameter)
One side of the wheel will need to be drilled & tapped to 7/16-14.

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers. Wheel will drop into place of the stock wheel.

This can be used with 2000-Up Sportsters, Dynas & Most Softails

(Also can be used with 1984-1999 Sportster, FXR, Softail and Dyna. These will need 2000-up brake disk, 2000-up sprocket/pulley and axle spacer adjustment.)

Drill and tap set available when you buy this kit:

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap
   

Kit Includes:
Adapter Hubs
Inner Wheel Sleeve
Hub Mounting Hardware
Bearings

(This does not include the wheel)

Having a hard time finding sealed bearing wheels?
This kit allows you to use the 1999-older tapered bearing wheel in place of 2000-up 3/4" ,1" or 25mm sealed bearing wheels.
Timken bearings are not used, new bearings are used in the adapter hubs.
Adapts 1984-99 19" Front Mag or Wire Wheels to Rear of 2000-Up Sportsters.
Use your stock Brake rotor and sprocket/pulley bolts.

This can be used with any Harley Model(Dyna, FXR, Softail)

Choose your Bearing/Axle Size from the list.

Includes:
Brake side hub adapter
Pulley side hub adapter
2 Bearings
1 Inner Bearing Sleeve
7/16-14 Spacer to wheel bolts- Grade 8
5/16-18 Spacer to wheel bolts- Grade 8

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap

Adapts 2000-Up & 1984-99 19" Front Mag Wheels to Rear of XL Sportsters
Use your stock Brake rotor and sprocket/pulley bolts
Stock bearings stay in the wheel, where they are the strongest.
Choose your Bike year from the list.

Please note 2005-2007 front wheels need to be converted from 3/4" to 1" to use on same year rear.

Includes:
Dual Pattern brake disk spacer
Dual Pattern pulley spacer
7/16-14 Spacer to wheel bolts- Grade 8
7/16 Lock Washers
5/16-18 Spacer to wheel bolts- Grade 8
2 Axle spacers

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap

Direct replacement for the OEM Sprocket

Replacement Compensator nut

Bolts to the bottom Cam Cover for front exhaust tab

High Strength Grade 8
Works with all 2006-Up Twin Cam and M8 Motors with our Compensator Eliminators

5/16 "Allen" Head Bolts for the brake side of 19" Rear Wheel Hub Sets and Morris Mag Hub Sets

Conversion kit includes everything needed to covert your 5 speed belt drive to a chain:
Transmission Sprocket
Rear Wheel Sprocket
Chain

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 02-08 Touring Swingarms when swapped into an FXR
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Replaces O.E.M. plastic sleeve
Stops shifter shaft leaks.

Stock Replacement For 2000-Up Bikes
Has 2.2 Locating Diameter for 2000-Up Wheels
For Wheels that have standard 5 Bolt Pattern.
Made from Stainless Steel & works with stock or aftermarket calipers.
11.5" OD

Adapts 1978-1999 3/4" Timken bearing front wheels(9/13 Spoke mags, wire wheels and any other timken wheel) to be used on 2018-Up Softail Low Rider & Street Bob
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock disks)

All Parts you need to rebuild a 1978-99 Timken bearing Front wheel.

All Parts you need to rebuild a 1973-99 Timken bearing rear wheel.

Replacement rear wheel spacer for our 2007 & 2008 Bagger Chain Kit

Billet Aluminum
Use with 2" Long Bolts

 14mm Long Reach Set

• Great for any dirt bike/single cylinder motorcycle.
•  No adapters needed, can be taken apart to be cleaned.
  
• Stainless Steel

Push in cap, start motor, once motor starts, compression release automatically pops off.

4 Piston 2000-07 Style Brake Caliper made to fit 1984-99 Legs

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2018-Up Streetbob & Low Rider Softails
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Stiffen up the feel of your handlebars with these solid riser bushings. Uses your stock riser hardware. 

•  Stainless Steel
• Made in the USA
• Sold as a set

Special Wheel Bearing with 3/4" Inside Diameter and same thickness as a 25mm Harley Wheel Bearing
Bearing Dimensions: 0.59"(15mm) Width, 2.046"(52mm) OD, 3/4" ID
Sold Each

This kit is everything you need to swap out those tapered bearings for Sealed Ball bearings.