Vulcanworks

(2) .048" Thick Shims for fine tuning motor sprocket to clutch basket alignment.

Works with all Big Twin engines from 1958-2006 (except 2006 Dyna)

(2) .048" Thick Shims for fine tuning motor sprocket to clutch basket alignment.

Works with all 2006+ Twin Cam & M8 engines (except 2006 Touring & Softail)

Heat Treated and Ground 4140 Tool Steel

1970-99 Big Twin

1999-2002 Twin Cam Touring
These are the Timken Bearing motors

2001-2002 Twin Cam Softail

Replaces Harley Davidson # 24039-01

2003-06 Twin Cams (Except 2006 Dynas)
Replaces Harley Davidson # 24039-03

2006-up Twin Cam Dynas, 2007-up All Twin Cams
Replaces Harley Davidson # 24009-06

Use These adapters when installing a wheel with 1 inch bearings on a frontend made for 3/4” axles.
These adapters are used instead of changing bearings, and a new inner bearing spacer will NOT have to be fabricated.

Use These adapters when installing a wheel with 25mm bearings on a frontend made for 3/4� axles.
These adapters are used instead of changing bearings, and a new inner bearing spacer will NOT have to be fabricated.

Now Available for 7 Spoke 19" Morris Mags Wheels (Harley # 43522-77)
We have made hubs that adapt this wheel to replace 2000-Up Rear Wheel applications
Uses standard 2000-Up Brake disc and Sprocket/Pulley (2.2" Locating Diameter)
One side of the wheel will need to be drilled & tapped to 7/16-14.

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers. Wheel will drop into place of the stock wheel.

This can be used with 2000-Up Sportsters, Dynas & Most Softails

(Also can be used with 1984-1999 Sportster, FXR, Softail and Dyna. These will need 2000-up brake disk, 2000-up sprocket/pulley and axle spacer adjustment.)

Drill and tap set available when you buy this kit:

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap
   

Kit Includes:
Adapter Hubs
Inner Wheel Sleeve
Hub Mounting Hardware
Bearings

(This does not include the wheel)

Having a hard time finding sealed bearing wheels?
This kit allows you to use the 1978-83 Dual Disk tapered bearing wheel in place of 2000-up 3/4" ,1" or 25mm sealed bearing wheels.
Timken bearings are not used, new bearings are used in the adapter hubs.

Adapts 1978-83 Dual Disk 19" Front Wheels (WITH 2-3/8" Locating Lips) to Rear of 2000-Up Sportsters.

Use your stock Brake rotor and sprocket/pulley bolts.

This can be used with any Harley Model(Dyna, FXR, Softail)

Choose your Bearing/Axle Size from the list.

Includes:
Brake side hub adapter
Pulley side hub adapter
2 Bearings
1 Inner Bearing Sleeve
7/16-14 Spacer to wheel bolts- Grade 8
7/16 Lock Washers
5/16-18 Spacer to wheel bolts- Grade 8

Wheel needs to drilled and tapped for 7/16-14 Thread for Sprocket side bolts.

Drill and tap set available separately when you buy this kit
Kit has

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap