Vulcanworks
Wheel Seal Pair, 1984-99
Fits cast or wire, front and rear wheels, on most Sportsters & Big Twins Includes 2 Seals (one wheel) HD# 47519-83A |
$4.50
$3.99
11% OffWide-Glide Conversion Front Axle, 3/4" B/T Wheel in 08-Up XL, 04-05 Dyna, FXST, FLST
This is a conversion axle that will allow you to use a 16", 18" or 21" Big Twin Wheel(Softail,Wide-Glide Dyna, Touring & most aftermarket) with 3/4" Bearings(Timken or Sealed) with the Front Ends Listed Above |
$99.00
Wide-Glide Conversion Front Axle, 3/4" Wheel in 08-Up XL, 04-05 Dyna, FXST, FLST
Applications: This is a conversion axle that will allow you to use a 19" or 21" Narrow-Glide Wheel(XL, FXR, DYNA) with 3/4" Bearings(Timken or Sealed) with the Front Ends Listed Above |
$80.00
Wrist Pin Bushings, 1936-99 Big Twins, .010 Over, 24335-36
1936-99 Harley Big Twins |
$27.00
$24.23
10% OffWrist Pin Bushings, 1936-99 Big Twins, 24334-36
1936-99 Harley Big Twins |
$27.00
$24.23
10% OffWrist Pin Bushings, 57-Up XL Sportster, .010 Over, 24332-36
1957-Up Harley XL Sportster |
$27.22
$24.50
10% OffWrist Pin Bushings, 57-Up XL Sportster, 24331-36
1957-Up Harley XL Sportster |
$27.22
$24.50
10% OffXL & 4-Speed Big Twin Rear Axle Adjuster Plate Set
Replace your rusty steel plates with our Billet Aluminum ones. |
$19.50
$26.24
$19.45
26% OffXzotic Knuckle & Panhead PCV Gasket Kit, EVO
Set of Top & Bottom Breather Gaskets for Both Heads For Xzotic Knuckle and Panhead EVO Only These are not the same as stock Twin cam gaskets. |
$15.00
Xzotic Knuckle Base, EVO, Cast, [A]
Front or Rear Head
BASE ONLY EVO Motors Only Sold Each |
$175.00
Xzotic Knuckle Hardware Kit, EVO
Hardware for both heads Includes:
8 1/4” Brass Sealing Washers |
$32.00
Xzotic Knuckle Hex Nut EVO or TC, [X]
Front or Rear Head For EVO or Twin Cams Motors Sold Each
|
$15.00
Xzotic Knuckle PCV Valve Cover, EVO, [D]
Front or Rear Head EVO Motors Only Sold Each |
$21.50
Xzotic Knuckle PCV Valve Lower Housing, EVO, [C]
Front or Rear Head EVO Motors Only Sold Each |