2000-2007

Adapts 1978-1983 Timken bearing Front wheels to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has correct length axle spacers and special width adapter disk spacers to work with the 2000-up legs.
Includes special ID bore brake disk made so no modification to wheel is necessary. Replacement brakes disks available here
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

Corrects 1984-1999 Timken bearing Front wheel width and bearing spacing to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has special length axle spacers and special width adapter disk spacer.
Made to use 2000-Up Brake Disks.
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

If you have a bike with a 1" or 25mm axle please see other adapter kit.

 

This Kit converts your:
2008-17 XL, 2008-17 Dyna or 2008 Touring Rear Wheel
to 1" bearings & the correct width for
06-07 Dyna, 05-07 XL & 02-07 Touring (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Includes:
2- 1" Special Width Bearings
1- Axle Sleeve

This kit Converts 2008-Up XL Front Narrow Wheels to 2000-2007 Sportsters & 2000-2003 Dyna

Keep the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out

Kits Includes:
-2 Stainless Steel Bearing Adapters
-One New Axle Spacer
 

These kits Convert 25mm Rear Wheels from 2008-2017 Dyna, 2007-2017 Softail, 2008-Present Sportsters
TO
2000-2005 Dyna
2000-2007 Softail
2000-2003 Sportster
2004 Only Sportster
Choose your bike from the drop down menu

Reuse the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out
Kits Includes:
-2 Stainless Steel Bearing Adapters
-New Sprocket/Pulley Side Axle Spacer
-New Brake Side Axle Spacer

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportster
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers
No other change needed.
Adapters included to use 2000-Up Brake Disks

We have put together kits for swapping bearing sizes or just replacing missing parts on your wheel.
These are just replacement parts for what would have come in stock wheels.

Rear kits are for all 2000-2007 Wheels including Softail, Dyna, XL and Touring

Front Narrow kits are for 2000-2007 XL and 2000-2005 DYNA Wheels Only(Wheels on 39mm Front Ends)

Front Wide Glide Kits are for 2000-2007 Softail, FXDWG, and Touring

All kits include 2 Bearings and the inner sleeve.

Adapts 1984-1999 Timken bearing Rear wheels to be used in place of 2000-2007 Bikes with 3/4" Axles (Sportster, Dyna, Bagger, Softails)


Inclued adapters to use 2000-Up Brake Disks if needed
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Note* This retains use of the tapered wheel bearings but can also be used with our sealed bearing kit

Includes:

• 2 Axle Spacers, 
• 2 Locating Diameter Adapters