New Added Products

Adapts 2000-22 39mm Front End Wheels (3/4", 1" or 25mm bearing)(13 Spoke mags, wire wheels and any other  wheel) to be used on 2018-Up Softail Low Rider S Inverted Front Ends
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using new axle with extended bearing journals, axle spacers & Disk Spacers

• Silver or Black anodized
• 1984-2017 foot pegs can be used for rider or passenger pegs.
• Pegs can be rotated and locked down for positioning.
• 4.125" X 1.5"
• Sold in pairs.

This Kit converts your 2000-2022 Narrow Front Mag Wheel with 3/4, 1" or 25mm Bearings to the correct width for 2011-2017 Harley 48 Sportsters.
Wheel will drop in place of your stock wheel with this setup.
There are 2 options available:
if the wheel had 3/4" or 1" bearings originally choose the 2000-07 year range from the drop down.
For a 25mm bearing wheel and the bearings are good choose the 2008-22 option. This will not include the bearings and inner sleeve.

Includes:
2- 25mm Bearings
1- Behind Bearing Spacer
2- Axle Spacers
1- Inner Sleeve
Brake Disk Spacer
Longer Stainless Steel Torx Bolts
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.
If you are unsure what your wheel had for bearings originally buy the 00-07 Kit as this will have everything you need for a 2000-22 Wheel

Replacement Adjusting Assembly for Primary Chain Adjuster
Heat Treated Steel

Our kit gears down your bike and upgrades the stock primary chain auto-adjuster to our bullet proof manual adjuster.
Solid sprocket conversion eliminates compensator assembly.

• One piece top engine mount which incorporates a coil mount for custom applications
• Chrome Plated Steel

Special width adapter disk spacer makes up difference between tapered bearing wheels and sealed bearing wheels
Made to use 2000-Up Brake Disks.

Set of 8 Bolts to Replace all Hub to Sprocket Bolts

Chrome Aluminum Hub

Chrome Spokes

Chrome Rim

Available With 3/4", 1" & 25mm Ball Bearings

1.045" Thick Disc Spacer
For Use With 1984-1999 XL, FXR & Dyna Front Wheels with 2000-Up 41mm Wide Glide Front End
Made to use 2000-up Brake Disks

-Billet Aluminum
-With Spacer to Wheel Hardware

Replacement Swingarm Bearing Set for 2002-Newer Touring/Bagger

FITS:
2002-Newer FLT/FLH Touring

Upgrade from the Stock Axle!
These are made with a 1/2" Square Drive for easy service with any ratchet.
Stock axles use a hard to find 3/4" hex drive, good luck changing your tire on the side of the road with that.
Extended bearing journals for use when swapping narrow wheels.
CNC Machined from 304 Stainless Steel.

Beautiful sand casting
CNC Machined

Made from hardened steel with black-oxide coating to prevent corrosion
Expands from 1-3/16" to 2-5/8"
This covers harley neck bearing races and timken wheel bearings