2018-UP

This Kit converts your 2006-2007 Dyna Front Wheel with 1" Bearings to the correct 25mm bearing width for 2018-up Softail Streetbob & FXLR
Has correct spacer that go behind the bearing to match OEM 25mm Wheel.
The older Wheel will drop in place of your 25mm wheel with this setup.

This Kit spaces your 2008-2017 Dyna Front Wheel correctly for 2018-up Softail Streetbob & FXLR/Low Rider
Use the stock bearings in your wheel, no axle spacers need to be changed.

This Kit converts your 2000-2007 XL & 00-05 Dyna Front Mag Wheel with 3/4 or 1" Bearings to the correct width for 2018-Up Streetbob, FXLR/LOW RIDER
Has correct axle & disc spacers to match OEM Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

This Kit converts your 2000-2007 Rear Wheel with 3/4 or 1" Bearings to 25mm & the right width for the 2018 Softails
Work with 2000-2007 Dyna, Softail(except nighttrain), Sportster and Touring Wheels
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.
This is for 2018-Up Low Rider, Low Rider S, Streetbob, Fatbob, FXLR, Softail Standard

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
1- Axle Spacer
1- Pulley/Sprocket Spacer
1- New Grade 8 Longer Bolts
Instructions

Note: Wheel that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.

This Kit converts your 2008-2017 Rear Wheel with 25mm bearings to the right width for the 2018-up Softails
Work with 2008-2017 Dyna, Softail(except nighttrain) & Sportster Wheels
Wheel will drop in place of your current wheel with this setup.
Has correct axle spacer and spaces the pulley out the correct amount to line up with transmission pulley. (If using with a chain kit we can combine the spacers needed into one)

This is for 2018-Up Low Rider, Low Rider S, Streetbob, Fatbob, FXLR, Softail Standard

Includes:
1- Axle Spacer
1- Pulley/Sprocket Spacer
1- Longer Grade 8 Bolts & Washers
Instructions

This Kit converts your 2008-22 XL Front Mag Wheel with 25mm Bearings to the correct width for 2018-Up Streetbob & FXLR/LOW RIDER
No need to swap out the bearings. Keep the original 25mm bearings in the wheel and just add spacers provided.
Has correct axle & disc spacers to match OEM Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2018-Up Streetbob & Low Rider Softails
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1978-1999 3/4" Timken bearing front wheels(9/13 Spoke mags, wire wheels and any other timken wheel) to be used on 2018-Up Softail Low Rider & Street Bob
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock disks)