Home :: Wheel & Bearing Conversion Kits :: 25mm Bearing Conv. for 1" & 3/4" Wheels to 49mm Front Ends

25mm Bearing Conv. for 1" & 3/4" Wheels to 49mm Front Ends

25mm Bearing Conv. for 1" & 3/4" Wheels to 49mm Front Ends
 
(0 reviews)  

Part #
4706
Online price:
$57.00
*Brake Disk
*ABS Bearing
Qty
Click here to be notified when Back-in-stock

This Kit converts your 2000-2007 Narrow Front Mag Wheel with 3/4 or 1" Bearings to the correct width for 49mm Narrow/Mid Front Ends
Has correct axle & disc spacers to match OEM 25mm Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG)

Includes:
2- 25mm Bearings
2- Axle Spacers
1- Inner Sleeve
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.
This kit will not work on sportster wheels that came with 25mm bearings(2008-Up) Use kit #4746
If your wheel has no bearings in them the best way to tell these apart is to measure the bearing bore depth.

FXR & Dyna Shifter Shaft Sleeve
$35.00
1" / 25mm ID Axle Spacers
$7.50
Harley 2000-UP Pulley/Sprocket Spacers
$13.58
Compensator Eliminator , 06+ Dynas, 07+ Softails, Dressers
$179.00
Shifter Sleeve Retaining Plate, FXR/Dyna
$10.75
Dyna Chain Conversion Kit, 2006-UP 6 Speed
$299.00
25mm Bearing Conversion for 3/4" & 1" Rear Wheels
$45.00
Front Brake Rotor Torx Bolt Set- Stainless
$8.00
Rear Brake Rotor Torx Bolt Set- Stainless
$10.00
There have been no reviews