Wheels and Bearings

Complete 7 Spoke 19" OEM Harley Morris Mag Wheel for front applications on 1984-Up Sportsters & 1992-2005 Dyna & 1984-2000 FXR

2.15" Wide

Assembled with our hubs, bearings pressed in and ready to go.
May Be used Dual or Single Disk

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers, will drop into place of the stock wheel.

PLEASE NOTE FOR 84-99 MODELS:
Must be used with 2000-Up Brake discs (2.2" Locating Diameter)

Complete 7 Spoke 19" OEM Harley Morris Mag Wheel for rear applications on 2000-Up Sportsters & Dynas
Assembled with our hubs, bearings pressed in and ready to go.

2.15" Wide

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers, will drop into place of the stock wheel.

Now Available for 7 Spoke 18" Morris Mags Wheels HD# 41037-77
We have made hubs that adapt this wheel to 2000-up applications.
Will drop in place of your 2000-Up  Rear Wheel with this kit.
Can also be used in place of timken bearing wheels with a 2000-Up Brake disc & Sprocket/Pulley

Now Available for 7 Spoke 19" Morris Mags Wheels
We have made hubs that adapt this wheel to replace 35mm and 39mm timken bearing applications.
Hubs have the correct width for 1984-1999 35mm and 39mm Front Ends.
We have eliminated the tapered wheel bearings, uses modern sealed ball bearings.
Must be used with 2000-Up Brake discs (2.2" Locating Diameter)
May Be used Dual or Single Disk

Includes:
Adapter Hubs
Inner Wheel Sleeve
Mounting Hardware
3/4" Bearings
Axle Spacers (To eliminate speedo drive)

(This does not include the wheel)

Now Available for 7 Spoke 19" Morris Mags Wheels
We have made hubs that adapt this wheel to replace 3/4", 1" and 25mm Wheels on 2000-Up 39mm Front Ends
Hubs have the correct width for 2000-Up 39mm Front Ends.
Uses stock 2000-Up Brake discs
May Be used Dual or Single Disk

Includes:
Adapter Hubs
Inner Wheel Sleeve
Mounting Hardware
3/4", 1" or 25mm Bearings

(This does not include the wheel)

Now Available for 7 Spoke 19" Morris Mags Wheels
We have made hubs that adapt this wheel to replace 1" and 25mm Wheels on 2006-Up 49mm Dyna Front Ends
Hubs have the correct width for 2006-Up Dyna Narrow/Mid Front Ends.(Not Wide Glide)
Uses stock 2006-Up Brake discs(Except large bolt pattern disks)
May Be used Dual or Single Disk

Solid Stainless Steel Axle will never rust or seize to bearings.
High Strength Steel adjusting plates
Stainless Steel Adjusting Screws with Lock nuts
Grade 8 Castle Nut uses cotter pin for positive locking, nut can not loosen like stock E-Clip Lock.
Includes Detailed Instructions, Drill and Center Punch
Made in USA.