All Dyna Wide Glide

Adapts 1984-1999 19” or 21” Front FXR, FXD & XL Wheels to 41mm Wide Glide Front Ends(FXST, FLST,FXDWG)

Includes:
1 Disc spacer
1 Stainless steel axle
2 axle spacers
5 Stainless steel cap screws
Instructions

Axle and Spacer kit to Adapt:
1984-99 FXR/XL/DYNA Front Wheels
to 2006-2017 Dyna Wide Glide FXDWG

Axle and Spacer kit to Adapt:
1984-99 FXR/XL/DYNA Front Wheels
to 2007-2017 Softails

Spacer kit to adapt 2000-2007 Rear Wheels with 3/4" Bearings to All 1984-99 Harleys

This Kit converts a 2000-2007 Front Wheel from a Bagger, FXDWG or Softail(00-06) that originally came with 3/4 or 1" Bearings to 25mm for use on 2007-17 Softails or 08-17 FXDWG
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub to clear inner sleeve.

Adapts:
2007-17 Softail Front wheels (25mm Bearings)
To
2000-2006 Softails &
2000-2005 FXDWG Dyna Wide Glide

This Kit converts your 2000-2007 Rear Wheel with 3/4 or 1" Bearings to 25mm
Work with Dynas, Softails(except nighttrain), Sportsters and Touring Wheels
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheel that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.

Adapts 2000-2007 XL and 2000-2003 FXD wheels to 2000-06 FXST

Includes: Stainless steel axle, Axle spacers and Stainless Steel Hardware

Adapts 1984-1999 3/4" Timken bearing rear wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1984-1999 Timken bearing Rear wheels to be used in place of 2000-2007 Bikes with 3/4" Axles (Sportster, Dyna, Bagger, Softails)


Inclued adapters to use 2000-Up Brake Disks if needed
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Note* This retains use of the tapered wheel bearings but can also be used with our sealed bearing kit

Includes:

• 2 Axle Spacers, 
• 2 Locating Diameter Adapters