Morris Mag Wheels and Hubs

Complete 7 Spoke 19" OEM Harley Morris Mag Wheel for front applications on 1984-Up Sportsters & 1992-2005 Dyna & 1984-2000 FXR

2.15" Wide

Assembled with our hubs, bearings pressed in and ready to go.
May Be used Dual or Single Disk

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers, will drop into place of the stock wheel.

PLEASE NOTE FOR 84-99 MODELS:
Must be used with 2000-Up Brake discs (2.2" Locating Diameter)

Now Available for 7 Spoke 19" Morris Mags Wheels (Harley # 43522-77)
We have made hubs that adapt this wheel to replace 2000-Up Rear Wheel applications
Uses standard 2000-Up Brake disc and Sprocket/Pulley (2.2" Locating Diameter)
One side of the wheel will need to be drilled & tapped to 7/16-14.

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers. Wheel will drop into place of the stock wheel.

This can be used with 2000-Up Sportsters, Dynas & Most Softails

(Also can be used with 1984-1999 Sportster, FXR, Softail and Dyna. These will need 2000-up brake disk, 2000-up sprocket/pulley and axle spacer adjustment.)

Drill and tap set available when you buy this kit:

• High Quality "U" Drill
• High Speed Steel 7/14-14 Plug Tap
   

Kit Includes:
Adapter Hubs
Inner Wheel Sleeve
Hub Mounting Hardware
Bearings

(This does not include the wheel)

Complete 7 Spoke 19" OEM Harley Morris Mag Wheel for rear applications on 2000-Up Sportsters & Dynas
Assembled with our hubs, bearings pressed in and ready to go.

2.15" Wide

Available with 3/4" , 1" or 25mm Sealed Bearings
Uses your stock axle spacers, will drop into place of the stock wheel.

Now Available for 7 Spoke 18" Morris Mags Wheels HD# 41037-77
We have made hubs that adapt this wheel to 2000-up applications.
Will drop in place of your 2000-Up  Rear Wheel with this kit.
Can also be used in place of timken bearing wheels with a 2000-Up Brake disc & Sprocket/Pulley

Now Available for 7 Spoke 19" Morris Mags Wheels
We have made hubs that adapt this wheel to replace 35mm and 39mm timken bearing applications.
Hubs have the correct width for 1984-1999 35mm and 39mm Front Ends.
We have eliminated the tapered wheel bearings, uses modern sealed ball bearings.
Must be used with 2000-Up Brake discs (2.2" Locating Diameter)
May Be used Dual or Single Disk

Includes:
Adapter Hubs
Inner Wheel Sleeve
Mounting Hardware
3/4" Bearings
Axle Spacers (To eliminate speedo drive)

(This does not include the wheel)

Now Available for 7 Spoke 19" Morris Mags Wheels
We have made hubs that adapt this wheel to replace 3/4", 1" and 25mm Wheels on 2000-Up 39mm Front Ends
Hubs have the correct width for 2000-Up 39mm Front Ends.
Uses stock 2000-Up Brake discs
May Be used Dual or Single Disk

Includes:
Adapter Hubs
Inner Wheel Sleeve
Mounting Hardware
3/4", 1" or 25mm Bearings

(This does not include the wheel)

Now Available for 7 Spoke 19" Morris Mags Wheels
We have made hubs that adapt this wheel to replace 1" and 25mm Wheels on 2006-Up 49mm Dyna Front Ends
Hubs have the correct width for 2006-Up Dyna Narrow/Mid Front Ends.(Not Wide Glide)
Uses stock 2006-Up Brake discs(Except large bolt pattern disks)
May Be used Dual or Single Disk

Now Available for 7 Spoke 18" Morris Mags Wheels that have a 5 Bolt pattern
We have made hubs that adapt this wheel to 2000-up applications.
Will drop in place of your 2000-Up  Rear Wheel with this kit.
Can also be used in place of timken bearing wheels with a 2000-Up Brake disc & Sprocket/Pulley