3/4" Sealed & Timken Bearing Wheels

Adapts 1978-83 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

Adapts 1978-1983 Timken bearing Front wheels to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has correct length axle spacers and special width adapter disk spacers to work with the 2000-up legs.
Includes special ID bore brake disk made so no modification to wheel is necessary.
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

Adapts 1984-1999 19” or 21” Front FXR, FXD & XL Wheels to 41mm Wide Glide Front Ends(FXST, FLST,FXDWG)

Includes:
1 Disc spacer
1 Stainless steel axle
2 axle spacers
5 Stainless steel cap screws
Instructions

Corrects 1984-1999 Timken bearing Front wheel width and bearing spacing to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has special length axle spacers and special width adapter disk spacer.
Made to use 2000-Up Brake Disks.
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

If you have a bike with a 1" or 25mm axle please see other adapter kit.

 

Adapts 1984-1999 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

These kits Convert 25mm 07-17 Softails Front Wheels to 96-99 Softail Front ends

Keep the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out
Note: This eliminates the speedo drive on bikes that had one.

Kits Includes:
-2 Stainless Steel Bearing Adapters
-Two New Axle Spacers
 

Adapts:
2007-17 Softail Front wheels (25mm Bearings)
To
2000-2006 Softails &
2000-2005 FXDWG Dyna Wide Glide

Adapts:
2007-17 Softail Rear wheels
2008-17 Dyna Rear wheels
2008-Present XL Wheels
2008 Bagger Rear wheels
-TO-
1986-99 Softail, Dyna & XL Rear

Adapts 1978-1999 3/4" Timken bearing front wheels(9/13 Spoke mags, wire wheels and any other timken wheel) to be used on 2018-Up Softail Low Rider & Street Bob
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock disks)

Adapts 1978-1983 FX & XL Dual Disc Wheel to 1972-84 41mm Front Ends with 10" Brake Disks

Includes: Stainless steel axle, Axle spacers and Stainless Steel Hardwae

Adapts 2000-2007 XL and 2000-2003 FXD wheels to 2000-06 FXST

Includes: Stainless steel axle, Axle spacers and Stainless Steel Hardware

Adapts a 2000-up Pulley or Brake Rotor to a Pre-1999 Wheel
 

These kits Convert 25mm Rear Wheels from 2008-2017 Dyna, 2007-2017 Softail, 2008-Present Sportsters
TO
2000-2005 Dyna
2000-2007 Softail
2000-2003 Sportster
2004 Only Sportster
Choose your bike from the drop down menu

Reuse the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out
Kits Includes:
-2 Stainless Steel Bearing Adapters
-New Sprocket/Pulley Side Axle Spacer
-New Brake Side Axle Spacer

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportster
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1984-1999 3/4" Timken bearing rear wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks