25mm Bearing Conversions

This Kit converts your 2000-2007 XL & 00-05 Dyna Front Mag Wheel with 3/4 or 1" Bearings to the correct width for 2018-Up Streetbob, FXLR/LOW RIDER
Has correct axle & disc spacers to match OEM Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

This Kit converts a 2000-2007 Front Wheel from a Bagger that originally came with 1" Bearings to 25mm for use on 2008-Up Touring Front ends
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub to clear inner sleeve.

This Kit converts a 2000-2007 Front Wheel from a Bagger, FXDWG or Softail(00-06) that originally came with 3/4 or 1" Bearings to 25mm for use on 2007-17 Softails or 08-17 FXDWG
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub to clear inner sleeve.

This Kit converts your 2008-22 XL Front Mag Wheel with 25mm Bearings to the correct width for 2018-Up Streetbob & FXLR/LOW RIDER
No need to swap out the bearings. Keep the original 25mm bearings in the wheel and just add spacers provided.
Has correct axle & disc spacers to match OEM Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

This Kit converts your 2008-Up XL Front Wheel to the correct width for 2008-up 49mm Narrow/Mid Dyna Front Ends
 Has correct axle & disc spacers to match OEM Dyna Wheel.
Keep the 25mm bearings already in the wheel and just add the spacers.
Wheel will drop in place of your stock wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG) or 16" & 18" XL Wheels

Includes:
2- Axle Spacers
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)

This Kit converts your 2006-2007 Dyna Front Wheel with 1" Bearings to the correct 25mm bearing width for 2008-up Dyna Front Ends
Has correct spacer that go behind the bearing to match OEM 25mm Wheel.
The older Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1- Bearing Spacer
1- Inner Sleeve
Instructions

This Kit converts your 2000-2007 Narrow Width Front Wheel with 3/4 or 1" Bearings to the correct width for 2008-up 39mm Narrow Front Ends
Has correct spacer that go behind the bearing to match OEM 25mm Wheel.
The older Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1- Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheel that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.

This Kit converts your 2000-2007 Narrow Front Mag Wheel with 3/4 or 1" Bearings to the correct width for 49mm Narrow/Mid Front Ends
Has correct axle & disc spacers to match OEM 25mm Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG)

Includes:
2- 25mm Bearings
2- Axle Spacers
1- Inner Sleeve
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.
This kit will not work on sportster wheels that came with 25mm bearings(2008-Up) Use kit #4746
If your wheel has no bearings in them the best way to tell these apart is to measure the bearing bore depth.

This Kit converts your 2000-2007 Rear Wheel with 3/4 or 1" Bearings to 25mm
Work with Dynas, Softails(except nighttrain), Sportsters and Touring Wheels
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheel that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.

We have put together kits for swapping bearing sizes or just replacing missing parts on your wheel.
These are just replacement parts for what would have come in stock wheels.

Rear kits are for all 2000-2007 Wheels including Softail, Dyna, XL and Touring

Front Narrow kits are for 2000-2007 XL and 2000-2005 DYNA Wheels Only(Wheels on 39mm Front Ends)

Front Wide Glide Kits are for 2000-2007 Softail, FXDWG, and Touring

All kits include 2 Bearings and the inner sleeve.