530 Chains, Master Links & Accessories

Available in Natural, Gold and Black

• Average tensile strength of 9,700 lbs.
• Includes rivet master link
• Made in Japan by a Major OE Chain Manufacturer

O-ring chain offers high durability.
Component designs, optimized with computer analysis, provide higher tensile strength.
Specially controlled heat treatment means tougher material.
Reinforced roller offers higher impact resistance and longer durability.

• Average tensile strength of 9,700 lbs.
• 1.5 to 2x longer wear resistance than regular O-ring chains
• Includes rivet master link
• Made in Japan by a Major OE Chain Manufacturer
• 120 Links Long

High-quality components coupled with a factory-greased seal ring ensures superior rigidity.
High-tensile steel used throughout the chain components; larger pins mean loads spread out over wider area, resulting in longer life and more strength.
Specially controlled heat treatment means tougher material and more durability.

Available in Chrome, Gold, Black & Black/Gold

• Average tensile strength of 11,200 lbs.
• Includes rivet master link
• Made in Japan by a Major OE Chain Manufacturer

120 Links is more than enough for most bikes. This is about 75" long
   18-Up Baggers with 24/58T, 25/55T or 25/58T sprockets will need a 150 Link
150 Link is 93.75" Long
160 Link is 100" Long

Extra Master Links Available here

High-quality components coupled with a factory-greased seal ring ensures superior rigidity.
High-tensile steel used throughout the chain components; larger pins mean loads spread out over wider area, resulting in longer life and more strength.
Specially controlled heat treatment means tougher material and more durability.

Allows Chain to be pulled or released without dropping in the dirt or readjusting sprockets when removing or inserting master link.
Not a required tool but makes it easy when installing or removing chains.
Can be used on any size motorcycle chain from #35 to 630

Made in USA

This is the real deal not a copy or look-a-like "threadlocker".
Easy to use does not require a primer and is even oil tolerent.
Replaces the harley recommended Loctite 270/271
Full cure time is 24 hours
.34 FL OZ

Rivet Stye Master Link for BMZR Chains

Available in Naural, Gold & Black

Select Color from Drop Down Menu

Rivet Stye Master Link for all the EK 3D Chains

Available in Gold or Black

Select Color from Drop Down Menu

Clip Stye Master Link for all Our O-Ring Chains

Available in Naural, Gold & Black

Select Color from Drop Down Menu

Master Link for all Our X-Ring Chains

Available in Naural, Gold & Black

Select Color & Type from Drop Down Menu

Exclusive Parafilm formula penetrates deep into the chain and sets up as a soft wax protecting the chain from rust and corrosion.
Lubricates from the inside out by drip feeding the pins and rollers.
Will not fling or attract dirt.

Replace old worn rubber cush drive inserts with more a durable polyurethane insert.
For all 2009-Present Touring

Solid Stainless Steel Axle will never rust or seize to bearings.
High Strength Steel adjusting plates
Stainless Steel Adjusting Screws with Lock nuts
Grade 8 Castle Nut uses cotter pin for positive locking, nut can not loosen like stock E-Clip Lock.
Includes Detailed Instructions, Drill and Center Punch
Made in USA.

Grade "8" 7/16 Bolts for all Harley sprockets and pulleys

Hex Bolts 1.25", 1.75", 1.5", 2", 2.25", 2.5" Lengths
Hex Bolts Made in Canada by INFASCO

Grade 8 are at least 25% stronger than medium-strength steel screws. Grade 8 steel hex head screws are marked with six radial lines. Length is measured from under the head.
150,000 PSI Tensile Strength

Includes Grade 8 Lock Washers(These are about 1/8" thick, so take that in to account)
Lock Washers made in USA by Wright

Sold in sets of 5 bolts & 5 Lock Washers

7/16 "Allen" Head Bolts with correct length for all sizes of our dual hole pattern spacers and 19" Rear Wheel Hub Kits

With a tensile strength of 170,000 psi, these alloy steel screws are stronger than Grade 8 steel screws.

Sold in sets of 5 bolts