Axles & Axle Spacers

1”/25mm ID axle spacers are made from 6061 billet aluminum bar stock, 1-1/2 OD, with a machine finish.
1/16" & 1/8" Sizes are Stainless Steel

These are made for 1" or 25mm ball bearing axles & wheels.

3/4” ID axle spacers are made from stainless steel, 1-1/8 OD by 3/4 ID.

These are made for 3/4” Timken & ball bearing wheels.

Sizes Available: 1/4" - 5/16" - 3/8" - 1/2" - 5/8" - 3/4" - 7/8" - 1" - 1-1/16" - 1-1/4" - 1-3/8" - 1-1/2" - 1-5/8" - 1-3/4' - 2" - 2-1/8" - 2-1/4" - 2-3/8" - 2-1/2" - 2-3/4' - 3"

Each application comes with all spacers for an axle.

3/4" Sets made from Stainless Steel
1" & 25mm spacers are Aluminum

Each application comes with all spacers for an axle.

Made from Stainless Steel

Each application comes with all spacers for an axle.

3/4" Sets made from Stainless Steel
1" & 25mm spacers are Aluminum

Each application comes with all spacers for an axle.
99-Older rear sets have 3 axle spacers.
3/4" Sets made from Stainless Steel
1" & 25mm Spacers are Aluminum

Made from 1214 alloy steel & satin chrome plated, 1-1/8 OD by 3/4 ID.

These are made for 3/4” Timken bearing wheels, with a hard coat finish so they can be used as wheel seal adapters.

1”/25mm ID axle spacers are made from 6061 billet aluminum bar stock, 1-1/2 OD, with a Black Anodized Finish

These are made for 1" or 25mm ball bearing axles & wheels.

Adapts 1984-1999 3/4" Timken bearing rear wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2018-Up Streetbob & Low Rider Softails
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 02-08 Touring Swingarms
Use this when swapping the 02-08 swingarm into an FXR to keep your wheel.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Use These adapters when installing a wheel with 1 inch bearings on a frontend made for 3/4” axles.
These adapters are used instead of changing bearings, and a new inner bearing spacer will NOT have to be fabricated.

Use These adapters when installing a wheel with 25mm bearings on a frontend made for 3/4� axles.
These adapters are used instead of changing bearings, and a new inner bearing spacer will NOT have to be fabricated.

Solid Stainless Steel Axle will never rust or seize to bearings.
High Strength Steel adjusting plates
Stainless Steel Adjusting Screws with Lock nuts
Grade 8 Castle Nut uses cotter pin for positive locking, nut can not loosen like stock E-Clip Lock.
Includes Detailed Instructions, Drill and Center Punch
Made in USA.

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 2005-Up Sportster
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers
No other change needed.
Adapters included to use 2000-Up Brake Disks