FXR Wheel in a 02-08 Touring Swingarm

Adapts 1978-1999 3/4" Timken bearing rear wheels(9/13 Spoke mags or wire wheels) to be used on 02-08 Touring Swingarms when swapped into an FXR
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers.
No other change needed.
Adapters included to use 2000-Up Brake Disks

Eliminates the Eccentric/Cam Adjusters with our heavy duty steel adjuster blocks.
The stock cam adjust axle is a major drawback of this swingarm and this completely fixes the issue of the axle sliding forward and loosening the belt/chain.

Uses original bearings in the wheel.
ALSO AVAILABLE WITH QUAD SEALED BEARINGS
Timken bearing wheels have the bearings mounted much further inboard vs sealed bearing wheels.
The quad bearing setup makes the bearing load points on the axle wider (and closer to the swingarm). Increasing strength and reducing the possibilty of bent axles.
This is highly recommended if your going to beat on your bike.

Includes:
  High Strength (Heat Treated) 17-4 Stainless Steel 3/4" Axle made for 02-08 Touring Swingarms
  Correct Axle Spacers
  Adapter Spacer for Brake Caliper Mount
  Grade 8 Axle Flange Lock-Nut
  Heavy Duty Adjuster Blocks
  Adapters to use 2000-Up Sprocket/Pulley & Brake Disk