Conversion kit includes everything needed to covert your 2006-UP XL belt drive to a chain:
This kit is for a stock size 150 rear tire.
Please be aware depending on how high or low your bike is, you may have chain to passenger peg mount interference and/or chain guard mount interference.
You may need to cut these off.
A BIGGER TRANSMISSION SPROCKET AND WHEEL SPROCKET WILL GIVE YOU MORE CLEARANCE
Gearing info:
2004-2010 883: 21T Front Sprocket and 51T Rear Sprocket is equivalent to the stock belt drive gearing.
2004-20 1200 & 2011-20 883: 21T Front Sprocket and 49T Rear Sprocket is equivalent to the stock belt drive gearing.
Transmission Sprocket
-
Heat Treated Steel
-
21/22/23 Tooth
Steel Rear Wheel Sprocket
-
Full .350 thickness for 530 Chain, beware of other thin .25 thickness sprockets out there.
-
Steel Sprockets last longer than aluminum sprockets and are ideal for high load situations (Burnouts, Wheelies, High Horsepower Engines)
-
Black Powdercoat Steel or Chrome plated Steel
-
48, 49, 51, 55, & 58 Tooth Available
Trans. sprocket spacer
-
Special made for integrated bearing & spacer on 2006-Up XL
Grade 8 Bolts & Lock Washers
Chain Info:
530 O-Ring(BMOR) Chain
-
9,700lbs Tensile Strength
-
Includes Rivet Master Link
-
Component designs optimized with computer analysis provides higher tensile strength.
-
Specially controlled heat treatment means tougher material.
-
Reinforced roller offers higher impact resistance and longer durability.
-
Available in Natural, Black, Gold or Black/Gold
530 X-Ring (BMXR) Chain
-
9,700lbs Tensile Strength
-
Offering 1.5 to 2x longer wear resistance than regular O-ring chains.
-
Each refined component, designed with computer analysis, provides higher tensile strength.
-
Specially controlled heat treatment means tougher material and more durability.
-
Quad seal ring and reinforced pin and roller provide superior wear resistance, higher impact resistance and fatigue strength.
-
Quad seal ring offers less friction, which minimizes power loss, almost half that of standard O-ring chain.
530 High Strength BMZR Chain- Recommended for all baggers
-
11,200lbs Tensile Strength
-
Includes Rivet Master Link
-
Specifically developed for today's high-performance sport machines.
-
High-quality components coupled with a factory-greased seal ring ensures superior rigidity.
-
High-tensile steels used throughout the chain components; larger pins
mean loads spread out over wider area, resulting in longer life and more
strength.
-
Specially controlled heat treatment means tougher material and more durability.
-
Available in Chrome, Black, Gold or Black/Gold
530 EK 3D Chain- High Strength, Recommended for all baggers
3D
parts are precisely manufactured, leading to a greater improvement of
transmission efficiency, better acceleration and efficient engine work.
Features an original special plate with a lightening hole. EK creates a
hole on both ends of a pin to lighten the chain without weakening the
plate according to computer analysis. The edge-cut inner plate reduces
friction and realizes smooth engagement with sprocket. This plate
enables the chain to be light, removes mud from the hole and dissipates
heat effectively.
- 11,400lbs Tensile Strength
- Includes Rivet Master Link
- Reduced friction
- Chromium carbide pin with lighten hole in end
- Inner plate with lighten hole
- Dimpled outer plate.
- QX-2 ring
***IF YOU DONT SEE A SPROCKET OR CHAIN OPTION IN THE DROP DOWN MENUS IT MEANS WE ARE OUT OF STOCK OF THAT SPROCKET OR CHAIN***
|