Vulcanworks

Black Powdercoated Rear Sprocket for all 2000-Up (Non-Cush Drive) Wheels.

• Full thickness for 530 Chain, beware of other thin .25 thickness sprockets out there.
• Steel Sprockets last longer than aluminum sprockets and are ideal for high load situations
• 48,49,51Tooth Available

Includes adapter for Pre-1999 Wheels with 1.99" Locating Diameter

Chrome Plated Rear Sprocket for all 2000-Up (Non-Cush Drive) Wheels.

• Full thickness for 530 Chain, beware of other thin .25 thickness sprockets out there.
• Steel Sprockets last longer than aluminum sprockets and are ideal for high load situations
• 46,47,48,49,51,55 Tooth Available

Includes adapter for Pre-1999 Wheels with 1.99" Locating Diameter

Replacement Bearing & Race set for 1978-81 XL models
These have a 15/16" inner diameter

Sold each

Adapts 1978-83 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

Stock Replacement For 1980-84 FXR & FLT Models
Made for 530 Chains.
Choose from 22T or 23T
 

One Piece Rocker Base Gasket.
Fits all EVO Big Twins & All Evo Sportsters
Set includes 2 Gaskets
Modern Embossed Single Layer Steel with Viton Coating, these dont leak like paper ones.

Corrects 1984-1999 Timken bearing Front wheel width and bearing spacing to be used on 2000-2007 XL & 2000-2003 Dynas (3/4" Axle Bikes)
Kit has special length axle spacers and special width adapter disk spacer.
Made to use 2000-Up Brake Disks.
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Single or Dual Disk available

If you have a bike with a 1" or 25mm axle please see other adapter kit.

 

Adapts 1984-1999 Timken bearing front wheels to be used on 2008-newer XL(25mm) & 2004-2005 Dyna (1" Axle)
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
Includes:
  New 3/4" Axle made for 1" & 25mm Bearing Front Ends
  Correct Axle Spacers
  Special Adapter Disk Spacers
  New Axle Nut

One Piece Rocker Base Gasket.
Fits all Models of Twin Cam Engines from 1999-2017
Set includes 2 Gaskets
Modern Embossed Single Layer Steel with Viton Coating, these dont leak like paper ones.

2 " Extended, Satin Finish

2 " Extended, Chrome Finish

This Kit converts a 2000-2007 Front Wheel from a Bagger that originally came with 1" Bearings to 25mm for use on 2008-Up Touring Front ends
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub to clear inner sleeve.

This kit Converts 2000-07 Touring Wheels that came with 1" bearings to 1984-99 Touring Front Ends
 

This Kit converts your:
-2000-2007 XL Front Wheel
or
-2000-2005 Dyna Front Wheel
to 1" bearings & the correct width for
-2006-07 49mm Narrow/Mid Dyna Front Ends (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG) or 16" XL Wheels

Includes:
2- 1" Bearings
1- Inner Axle Sleeve
2- Axle Spacers
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)