Vulcanworks

Applications:
All 39mm Mid-Glides With 3/4" Bearings

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2000-03 FXD
2000-2007 XL Sportster

High Quality, American Made
Stainlees Steel Axle

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
1987-1999 FXR and FXD
1987-1999 XL Sportster

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:

2004-2005 FXD (1")
Will not fit FXDWG(Wide Glide)

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2008-2013 XL Sportster (Narrow Width Front Ends)

Applications:
Models With 1" Bearings

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
2008-Up Sportsters with 25mm Bearings

These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with ground bearing diameters and heat treated

These axles fit perfectly and will not chip, rust, or seize into your bearings.

Applications:
39mm Wide Glide Front Ends With 3/4" Wheel Bearings


These are not imported junk, we make these axles, and they are machined from stainless steel bar stock, with CNC turned bearing diameters.

These axles fit perfectly and will not chip, rust, or seize into your bearings.

For all 6 Speed Harley Transmissions:

• 2006-17 Dynas
• 2007-Up Touring/Dresser
• 2007-Up Softails

This offset is for custom use only, will not fit behind stock primarys!    

For all 6 Speed Harleys

• 2006-Up Dynas
• 2007-Up Touring/Dresser
• 2007-Up Softails
•  This is the replacement sprocket for our Cush drive chain kits.

Made From Tool Steel then Heat Treated for Long Lasting Strength.

Six Lighting Holes for reduced rotating weight.

These Sprockets use your Stock Lock Plate and Mainshaft Nut.

For all 6 Speed Harley Twin Cams & M8

• 2006-Up Dynas
• 2007-Up Touring/Dresser
• 2007-Up Softails

Made From Tool Steel then Heat Treated for Long Lasting Strength.

Six Lighting Holes for reduced rotating weight.

These Sprockets use your Stock Lock Plate and Mainshaft Nut.

Used with our Ignition & Auto Advance

Also Stock Replacment for Points Igntions

For all 6 Speed Twin Cam & M8 Harleys

• 2006-Up Dynas
• 2007-Up Touring/Dresser
• 2007-Up Softails

Made From Tool Steel then Heat Treated for Long Lasting Strength.

Six Lighting Holes for reduced rotating weight.

These Sprockets use your Stock Lock Plate and Mainshaft Nut.

We are calling this 1/2" offset as there is no "stock offset" sprocket to reference for 6 Speed Harleys.
But, is what you could consider a "Zero" Offset sprocket too, for use with stock width or 180 width tires.

For all 6 Speed Twin Cam & M8 Harleys

• 2006-Up Dynas
• 2007-Up Touring/Dresser
• 2007-Up Softails

Made From Tool Steel then Heat Treated for Long Lasting Strength.

These Sprockets use your Stock Lock Plate and Mainshaft Nut.

We are calling this 1/2" offset as there is no "stock offset" sprocket to reference for 6 Speed Harleys.
But, is what you could consider a "Zero" Offset sprocket too, for use with stock width or 180 width tires.