Conversion kit includes everything needed to covert your 1985-up 5 speed FXR or aftermarket 6 speed belt drive to a heavy duty 530 O-ring chain:
This kit is for a stock size 130/MT90 rear tire and the rear sprocket bolts
directly to the wheel, no spacer needed. This means the shortest bolts
possible and least chance of bolts coming loose.
22T Front Sprocket and 48T Rear Sprocket is equivalent to the stock belt drive gearing.
When using a 21 Tooth Front Sprocket:
48T Rear Sprocket= 4% Deeper (Faster Acceleration)
49T Rear Sprocket= 6.5% Deeper - This is the same ratio as a stock chain drive 1985 FXRS
51T Rear Sprocket= 10.5% Deeper
When using a 22 Tooth Front Sprocket:
47T Rear Sprocket= 2.5% Overdrive (More Top Speed)
48T Rear Sprocket= Stock Belt Drive Ratio
49T Rear Sprocket= 4% Deeper (Faster Acceleration)
51T Rear Sprocket= 6% Deeper
Transmission Sprocket
-
Heat Treated Steel
-
21, 22, 23 Tooth
Steel Rear Wheel Sprocket
-
Full thickness for 530 Chain, beware of other thin .25 thickness sprockets out there.
-
Steel Sprockets last longer than aluminum sprockets and are ideal for high load situations (Burnouts, Wheelies, High Horsepower Engines)
-
Black Powdercoat Steel or Chrome plated Steel
-
48, 49, or 51 Tooth Available
Belt to Chain Transmission sprocket spacer
-
Special made to use stock mainshaft seal with correct length for chain sprockets.
-
Included in all kits now.
Chain Info:
530 O-Ring(BMOR) Chain
-
9,700lbs Tensile Strength
-
Includes Rivet Master Link
-
Component designs optimized with computer analysis provides higher tensile strength.
-
Specially controlled heat treatment means tougher material.
-
Reinforced roller offers higher impact resistance and longer durability.
-
Available in Natural, Black, Gold or Black/Gold
530 X-Ring (BMXR) Chain
-
9,700lbs Tensile Strength
-
Offering 1.5 to 2x longer wear resistance than regular O-ring chains.
-
Each refined component, designed with computer analysis, provides higher tensile strength.
-
Specially controlled heat treatment means tougher material and more durability.
-
Quad seal ring and reinforced pin and roller provide superior wear resistance, higher impact resistance and fatigue strength.
-
Quad seal ring offers less friction, which minimizes power loss, almost half that of standard O-ring chain.
530 High Strength BMZR Chain- Recommended for all baggers
-
11,200lbs Tensile Strength
-
Includes Rivet Master Link
-
Specifically developed for today's high-performance sport machines.
-
High-quality components coupled with a factory-greased seal ring ensures superior rigidity.
-
High-tensile steels used throughout the chain components; larger pins
mean loads spread out over wider area, resulting in longer life and more
strength.
-
Specially controlled heat treatment means tougher material and more durability.
-
Available in Chrome, Black, Gold or Black/Gold
530 EK 3D Chain- High Strength, Recommended for all baggers
3D
parts are precisely manufactured, leading to a greater improvement of
transmission efficiency, better acceleration and efficient engine work.
Features an original special plate with a lightening hole. EK creates a
hole on both ends of a pin to lighten the chain without weakening the
plate according to computer analysis. The edge-cut inner plate reduces
friction and realizes smooth engagement with sprocket. This plate
enables the chain to be light, removes mud from the hole and dissipates
heat effectively.
- 11,400lbs Tensile Strength
- Includes Rivet Master Link
- Reduced friction
- Chromium carbide pin with lighten hole in end
- Inner plate with lighten hole
- Dimpled outer plate.
- QX-2 ring
***IF YOU DONT SEE A SPROCKET OR CHAIN OPTION IN THE DROP DOWN MENUS IT MEANS WE ARE OUT OF STOCK OF THAT SPROCKET OR CHAIN***
|