Products Map

2 " Extended, Chrome Finish

This Kit converts your 2000-2007 XL & 00-05 Dyna Front Mag Wheel with 3/4 or 1" Bearings to the correct width for 2018-Up Streetbob, FXLR/LOW RIDER
Has correct axle & disc spacers to match OEM Wheel.
Wheel will drop in place of your stock 49mm wheel with this setup.

This Kit converts a 2000-2007 Front Wheel from a Bagger that originally came with 1" Bearings to 25mm for use on 2008-Up Touring Front ends
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub to clear inner sleeve.

Spacer kit to adapt 2000-2007 Rear Wheels with 3/4" Bearings to All 1984-99 Harleys

This Kit converts your 2000-2007 Rear Wheel with 3/4 or 1" Bearings to 25mm & the right width for the 2018 Softails
Work with 2000-2007 Dyna, Softail(except nighttrain), Sportster and Touring Wheels
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.
This is for 2018-Up Low Rider, Low Rider S, Streetbob, Fatbob, FXLR, Softail Standard

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
1- Axle Spacer
1- Pulley/Sprocket Spacer
1- New Grade 8 Longer Bolts
Instructions

Note: Wheel that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.

This kit Converts 2000-07 Touring Wheels that came with 1" bearings to 1984-99 Touring Front Ends
 

This Kit converts your:
-2000-2007 XL Front Wheel
or
-2000-2005 Dyna Front Wheel
to 1" bearings & the correct width for
-2006-07 49mm Narrow/Mid Dyna Front Ends (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Please note this is not for 49mm WIDE Glide Front Ends(FXDWG) or 16" XL Wheels

Includes:
2- 1" Bearings
1- Inner Axle Sleeve
2- Axle Spacers
1 or 2 Brake Disk Spacers(Single or Dual Disk)
5 or 10 Stainless Steel Torx Bolts(Single or Dual Disk)

This Kit converts a 2000-2007 Front Wheel from a Bagger, FXDWG or Softail(00-06) that originally came with 3/4 or 1" Bearings to 25mm for use on 2007-17 Softails or 08-17 FXDWG
Has correct spacers that go behind the bearing to match OEM 25mm Wheel.
Wheel will drop in place of your 25mm wheel with this setup.

Includes:
2- 25mm Bearings
1 -Bearing Spacer
1- Inner Sleeve
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub to clear inner sleeve.

Adapts:2000-22 Sportster Narrow Glide Wheels & 2000-2005 Dyna Front Wheels
TO: 1988-99 FXR, DYNA, & Sportsters Using 2000-Up Style Calipers

Adapts: 2000-Up Brake Calipers TO 1988-1999 Dyna, FXR, Bagger, Softail & Sportster

Spacers have 2 bolt patterns.

One bolt pattern is drilled and counter-bored for 7/16" socket head cap screws, and the other for your stock pulley / sprocket bolts.

Includes 7/16" Bolts.

These have a 2.208 locating diameter and will fit 2000 & up wheels. (Ball Bearing Wheels)

These spacers have clearance for 1

This sprocket is made to fit 2006-up Twin Cam engines with 1970-2005 inner primarys and has right offset for use with 1998-06 clutch hub assemblies.
24 Spline , 25 Tooth

NEW!
Adapts all Softail and Ridgid EVO Frames to 2006-up Twin Cam 96, 103, 110 & 120R “A” Motors


Motor Adapter Plate includes:
Hardware
Oil line Fittings
O-Ring

NEW!
Adapts FXR & Dresser Transmissions/ Frames to 2006-up Twin Cam 96, 103, 106, 120, etc  “A” Motors


Motor Adapter Plate includes:
Hardware
Oil line Fittings
O-Ring