Products Map

For all 1973-1999 Sportsters & Big Twins

HD# 9052

All Parts you need to rebuild a 1973-99 Timken bearing rear wheel.

This guide and tap is used when threading the oil feed and return holes in the engine case.
Makes it easy to tap the hole straight.

These inserts make it easy to use a Rear Wheel on the front of your bike.

Converts the 7/16-14 thread of a rear wheel to 5/16-18 for front rotors and bolts.

Easy install with a Large screw Driver, Locktite pre-applied to external threads.

Set of 5 Inserts

This tool will install a Timken bearing assembly effortlessly. Has a oversized thrust bearing and is heat treated to last a lifetime.

Adapts 1984-1999 Timken bearing Rear wheels to be used in place of 2000-2007 Bikes with 3/4" Axles (Sportster, Dyna, Bagger, Softails)


Inclued adapters to use 2000-Up Brake Disks if needed
Wheels will drop in place of your current wheel, using your stock axle and axle spacers. No other change needed.
Note* This retains use of the tapered wheel bearings but can also be used with our sealed bearing kit

Includes:

• 2 Axle Spacers, 
• 2 Locating Diameter Adapters
   

Adapts 1978-1999 3/4" Timken bearing front wheels(9 Spoke mags or wire wheels) to be used on 2006-2017 Dyna Narrow/Mid Front Ends
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock dyna disks)
Single or Dual Disk available

Not for FXDWG(Wide Glide Dyna)

Axle and Spacer kit to Adapt:
1984-99 FXR/XL/DYNA Front Wheels
to
2006-2017 Dyna Wide Glide

Adapts 1984-1999 Timken bearing front wheels to be used on 2011-newer Sportsters with Mid Glide Front Ends
Examples are the SuperLow, Custom ,Forty Eight, Roadster & Possibilty other models
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks.
Single or Dual Disk available
 

Adapts 1978-1999 3/4" Timken bearing front wheels(9/13 Spoke mags, wire wheels and any other timken wheel) to be used on 2018-Up Softail Low Rider & Street Bob
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using our new conversion axle and axle spacers. No other change needed.
Made to use 2000-Up Brake Disks(your stock disks)

Special width adapter disk spacer makes up difference between tapered bearing wheels and sealed bearing wheels
Made to use 2000-Up Brake Disks.

We have sourced a high quality complete top end gasket kit for Late Model Big Twin Evolution Engines
This is a High Quality Kit with MLS Head Gaskets, FKM Rocker Rubber Gaskets, SLS Rocker Box Base Gaskets, N.O.K Valve Seals and Viton O-Rings

Fits all Evos & Twin Cam Harleys in a custom frame(non OEM), Softails, Rigids, 2000-2017 Twin Cam Softails & Dyna's
Will mount stock coil or coil bracket for dual coils.
-Billet Aluminum
-Natural Machined Finished
Has 1" Spacer To Clear Big Fin Heads
This top mount fits all of our coil brackets perfectly
Has 2" center to center hole spacing for stock style coil mounting also.

Fits all Evo & Twin Cam Harleys in a custom frame(non OEM), Softails, Rigids, & Dyna's
Will mount stock coil or coil bracket for dual coils.
-Billet Aluminum
-Black Powdercoat
Has 1" Spacer To Clear Big Fin Heads

This top mount fits all of our coil brackets perfectly
Has 2" center to center hole spacing for stock style coil mounting also.

Fits all Shovelhead & Panhead
Will mount stock coil or coil bracket for dual coils.
-Billet Aluminum
-Natural Machined Finished
Has 1" Spacer To Clear Big Fin Heads

This top mount fits all of our coil brackets perfectly
Has 2" center to center hole spacing for stock style coil mounting also.