Products Map

Adapts:2000-22 Sportster Narrow Glide Wheels & 2000-2005 Dyna Front Wheels
TO: 1988-99 FXR, DYNA, & Sportsters Using 2000-Up Style Calipers

Adapts 2000-2022 XL and 2000-2003 FXD wheels to 2008-Newer Touring

This Kit converts your 2000-2022 Narrow Front Mag Wheel with 3/4, 1" or 25mm Bearings to the correct width for 2011-2017 Harley 48 Sportsters.
Wheel will drop in place of your stock wheel with this setup.
There are 2 options available:
if the wheel had 3/4" or 1" bearings originally choose the 2000-07 year range from the drop down.
For a 25mm bearing wheel and the bearings are good choose the 2008-22 option. This will not include the bearings and inner sleeve.

Includes:
2- 25mm Bearings
1- Behind Bearing Spacer
2- Axle Spacers
1- Inner Sleeve
Brake Disk Spacer
Longer Stainless Steel Torx Bolts
Instructions

Note: Wheels that came with 3/4" bearings will need about 1/4" ground/drilled out of the hub.
If you are unsure what your wheel had for bearings originally buy the 00-07 Kit as this will have everything you need for a 2000-22 Wheel

Adapts 2000-22 39mm Front End Wheels (3/4", 1" or 25mm bearing)(13 Spoke mags, wire wheels and any other  wheel) to be used on 2018-Up Softail Low Rider S Inverted Front Ends
Corrects hub width and bearing spacing.
Wheels will drop in place of your current wheel, using new axle with extended bearing journals, axle spacers & Disk Spacers

Adapts: 2000-Up Brake Calipers TO 1988-1999 Dyna, FXR, Bagger, Softail & Sportster

Spacers have 2 bolt patterns.

One bolt pattern is drilled and counter-bored for 7/16" socket head cap screws, and the other for your stock pulley / sprocket bolts.

Includes 7/16" Bolts.

These have a 2.208 locating diameter and will fit 2000 & up wheels. (Ball Bearing Wheels)

These spacers have clearance for 1

This sprocket is made to fit 2006-up Twin Cam engines with 1970-2005 inner primarys and has right offset for use with 1994-06 clutch hub assemblies.
24 Spline , 25 Tooth

NEW!
Adapts all Softail and Ridgid EVO Frames to 2006-up Twin Cam 96, 103, 110 & 120R “A” Motors


Motor Adapter Plate includes:
Hardware
Oil line Fittings
O-Ring

NEW!
Adapts FXR & Dresser Transmissions/ Frames to 2006-up Twin Cam 96, 103, 106, 120, etc  “A” Motors


Motor Adapter Plate includes:
Hardware
Oil line Fittings
O-Ring

This sprocket is made to fit 2006/7-up Twin Cam engines with 1970-2005 inner primarys and has right offset and tooth combination for use with 1984-1993 clutch hub assemblies.
24 Spline , 24 Tooth

These kits Convert 25mm 07-17 Softails Front Wheels to 96-99 Softail Front ends

Keep the 25mm bearings in the wheel, Put the adapters in and replace the stock axle spacers with the ones included in the kit. The spacing is all figured out
Note: This eliminates the speedo drive on bikes that had one.

Kits Includes:
-2 Stainless Steel Bearing Adapters
-Two New Axle Spacers
 

Adapts:
2007-17 Softail Front wheels (25mm Bearings)
To
2000-2006 Softails &
2000-2005 FXDWG Dyna Wide Glide

This Kit converts a 2008-17 Dyna Front Wheel that originally came with 25mm Bearings to 1" for use with 2006-2007 Dyna Front Ends
Re-use the inner bearing sleeve from the 08-Up wheel with new bearings included in kit.
If you are missing this sleeve, you can add it to your order from the drop down menu

This Kit converts your 2008-2017 Rear Wheel with 25mm bearings to the right width for the 2018-up Softails
Work with 2008-2017 Dyna, Softail(except nighttrain) & Sportster Wheels
Wheel will drop in place of your current wheel with this setup.
Has correct axle spacer and spaces the pulley out the correct amount to line up with transmission pulley. (If using with a chain kit we can combine the spacers needed into one)

This is for 2018-Up Low Rider, Low Rider S, Streetbob, Fatbob, FXLR, Softail Standard

Includes:
1- Axle Spacer
1- Pulley/Sprocket Spacer
1- Longer Grade 8 Bolts & Washers
Instructions

This Kit converts your:
2008-22 XL, 2008-17 Dyna or 2008 Touring Rear Wheel 
to 1" bearings & the correct width for
06-07 Dyna, 05-07 XL & 02-07 Touring (1" Axle)

Wheel will drop in place of your stock wheel with this setup.

Includes:
2- 1" Special Width Bearings
1- Axle Sleeve