Touring Chain Conversion Kit, 1985-2006

Conversion kit includes everything needed to covert your 1985-2006 5 speed belt drive to a heavy duty 530 O-ring chain:
This kit is for a stock size rear tire.

22T Front Sprocket and 48T Rear Sprocket is equivalent to the stock belt drive gearing.

When using a 21 Tooth Front Sprocket:
48T Rear Sprocket= 4% Deeper (Faster Acceleration)
49T Rear Sprocket= 6.5% Deeper - This is the same ratio as a stock chain drive 1985 FXRS
51T Rear Sprocket= 10.5% Deeper

When using a 22 Tooth Front Sprocket:
47T Rear Sprocket= 2.5% Overdrive (More Top Speed)
48T Rear Sprocket= Stock Belt Drive Ratio
49T Rear Sprocket= 4% Deeper (Faster Acceleration)
51T Rear Sprocket= 6% Deeper

Transmission Sprocket

• Heat Treated Steel
• 21, 22, 23 Tooth

Steel Rear Wheel Sprocket

• Full thickness for 530 Chain, beware of other thin .25 thickness sprockets out there.
• Steel Sprockets last longer than aluminum sprockets and are ideal for high load situations (Burnouts, Wheelies, High Horsepower Engines)
• Black Powdercoat Steel or Chrome plated Steel
• 48, 49, or 51 Tooth Available

Belt to Chain Transmission sprocket spacer

• Special made to use stock mainshaft seal with correct length for chain sprockets.
• Included in all kits now.

We have 3 Grades of Sealed Chains available:

• Standard O-Ring Chain
• X-Ring Seal- Longer Lasting Seal, Same Strength as O-Ring
• BMZR- Sealed Drag Race Chain, Strongest Available and recommended for all baggers.

Chain Info:

530 O-Ring(BMOR) Chain

• 9,700lbs Tensile Strength
• Includes Rivet Master Link
• Component designs optimized with computer analysis provides higher tensile strength.
• Specially controlled heat treatment means tougher material.
• Reinforced roller offers higher impact resistance and longer durability.
• Available in Natural, Black, Gold or Black/Gold
  

530 X-Ring (BMXR) Chain

• 9,700lbs Tensile Strength
• Offering 1.5 to 2x longer wear resistance than regular O-ring chains.
• Each refined component, designed with computer analysis, provides higher tensile strength.
• Specially controlled heat treatment means tougher material and more durability.
• Quad seal ring and reinforced pin and roller provide superior wear resistance, higher impact resistance and fatigue strength.
• Quad seal ring offers less friction, which minimizes power loss, almost half that of standard O-ring chain.
   

530 High Strength BMZR Chain- Recommended for all baggers

• 11,200lbs Tensile Strength
• Includes Rivet Master Link
• Specifically developed for today's high-performance sport machines.
• High-quality components coupled with a factory-greased seal ring ensures superior rigidity.
• High-tensile steels used throughout the chain components; larger pins mean loads spread out over wider area, resulting in longer life and more strength.
• Specially controlled heat treatment means tougher material and more durability.
• Available in Chrome, Black, Gold or Black/Gold

530 EK 3D Chain- High Strength, Recommended for all baggers

3D parts are precisely manufactured, leading to a greater improvement of transmission efficiency, better acceleration and efficient engine work.
Features an original special plate with a lightening hole. EK creates a hole on both ends of a pin to lighten the chain without weakening the plate according to computer analysis. The edge-cut inner plate reduces friction and realizes smooth engagement with sprocket. This plate enables the chain to be light, removes mud from the hole and dissipates heat effectively.

• 11,400lbs Tensile Strength
• Includes Rivet Master Link
• Reduced friction
• Chromium carbide pin with lighten hole in end
• Inner plate with lighten hole
• Dimpled outer plate.
• QX-2 ring

***IF YOU DONT SEE A SPROCKET OR CHAIN OPTION IN THE DROP DOWN MENUS IT MEANS WE ARE OUT OF STOCK OF THAT SPROCKET OR CHAIN***